Aw11 MR2 Flip Kit! The final Key to bump steer reduction!
Since we now have RCA's for the front and rear of the AW11 MR2, we figured we go the rest of the way to correct the bumpsteer issues on the front of lowered MR2's
These "flip kits" allow you to reposition the outer tie rod from the top of the steering knuckle to the bottom of the knuckle. This will tame the handling of the car by getting rid of unwanted bump steer.
Comes with CNC machined stainless inserts and straight shank drill for install. Price is $60 for this kit.
This will only work on the Aw11 MR2.
posted by Gabriel Tyler @ 11:09 AM
-
240Z, 260Z and 280Z Front Lower Control Arms!
We have just finished our first run of Z front lower control arms!
Fully Fabricated steel lower control arms (No used OEM parts)
Double adjustable hardware (extend or shorten on car, no unbolting)
OEM style ball joints, strongest option, easy replacement
All plated or stainless hardware Oversized Teflon lined 3 piece rod ends on inboard side
Body is powder coated Metallic Gunmetal Grey
Boxed lower section for added strength
Length adjustable from .25" below factory to 1.5" over factory
2 settings for the swaybar droplink (for widening the track of the car)
Heavy gauge steel used throughout for much more added strength over factory
MSRP $350 per pair with brand new balljoints.
4AG 16V and 20V Connecting Rods!
  We now have BelFab H-Beam connecting Rods available! We have these for all model 4AG's, both 16V and 20V.
We also have these available for the 7AFE! Want a 1.8L 7AG? These are the ticket.
Fully machined to guarantee the removal of all surface imperfections in the forging. After heat treatment, each connecting rod is 100% magnaflux inspected and hardness checked, then machined to final size. Each set of rods is balanced and then shot peened to achieve the ultimate in strength and fatigue properties.
Price is $390 a set of 4!
|
