Lotus Parts! New Product Development!
Due to the untimely demise of the wife's very trick MR2 Spyder at the hands of a utility truck and a guardrail, we ended up in the market for another ride.
We bought a 2005 Honda S2K....and it just wasn't right. Not the car for us.
We needed something more like the Spyder. Once you get used to super light and quick, it's hard to change up to a heavier car.
She took a spin in the Lotus Elise and got out of the car with a huge grin. Said she had more fun in the 5 minutes in the Elise than the 2 weeks in the S2K. It just felt "Right".
After a bit of looking and some very good luck, we found a great deal on a Lotus Exige with the Blackwatch Racing supercharger installed.
It's ours! It's at home, it's getting driven every day and guess what? We are going to make parts for Lotus cars!
posted by Gabriel Tyler @ 11:18 PM
-
Slotted Rotor and Pad Kits available!
 Looking for an affordable performance braking option for the AE86 Corolla? Here's the ticket!
A full set of crossdrilled and slotted rotors, and a full set of PBR semi-metalic pads for $195!
Tokico HTS now available!
We now have Tokico HTS Available! Infintely adjustable by a allen head screw at the top of the shock.
These are the very Short Stroke Shock option for the AE86 so popular in Japan.
The ride is very smooth and controlled with these shocks.
We can build custom coilovers around the front and provide swift springs around the rear, if you like. (We can not build rear coilovers on these shocks).
Price is $725 a set of four. Sold only in sets of four.
posted by Gabriel Tyler @ 3:49 PM
-
4AG Crank EDIS Trigger Wheels now Available
 At the request of several of our customers, we now make EDIS trigger wheels that will bolt directly onto our crank pulleys!
These will fit on our single row, or double row crank pulleys for any model 4AG.
The mount on the back side, helping to reduce any unwanted flexing or movement, and ride directly on the boss of our pulley, insuring that they will run true at any RPM.
They can be indexed to any position you need, making them very convenient. We have added one extra hole to the pulley opposite the trigger slot to balance the steel edis wheel.
On our single row pulley, with the EDIS wheel installed it still comes in at only 2 LB's. That's less than half the weight of the stock steel pulley.
As with all of our other crank pulleys, we enlarge the boss to 200% the original size to prevent keyway breakout at ANY rpm.
Crank pulleys are available in RED, SILVER, or GOLD color.
Crank Pulley alone $130
Crank Pulley with EDIS wheel $180
EDIS wheel alone $50
DIY Weld On Lower Control Arm Kit now available!
 We now have do it yourself weld on lower control arm kits!
For those that have the resources, this is a more affordable option than our complete lower control arms. This is also a much more modular setup, allowing use on many more models of cars!
These are specifically designed for the AE86 Corolla, but a quick glance around the shop showed that these could be adapted to just about any similar style lower control arm, Toyota, Datsun or other!
These units are double adjustable, so can be extended or shortened even when mounted on the car!
Comes with the lower panel that completely boxes in your lower control arm for added strength.
Rod ends are massively oversized 3 piece telfon lined units with a 5/8" bore and 3/4" shank!
We can provide 12mm or 14mm stainless bushings or just about any other size to meet your needs!
Other than the bottom plate, and the square steel block, all parts are stainless or plated to prevent corrosion.
Price is $175 for a complete pair.
AE86 Hatch Bars in Aluminum!!!
 We now have Hatch Bars available. This is for use on the AE86 Hatchback only. The large rectangular opening for the rear hatch allows a lot of chassis flex on the AE86. This bar uses the two factory built in threaded sockets on the rear C-Pillars and helps to tie the whole chassis together.
What's different about our bar? It's made out of light weight 6061 T-6 Aluminum hollow tubing. It weighs nearly nothing (important when mouting something so high in the chassis). Comes with all mounting hardware.
You can have the bar raw aluminum or your choice of paint color (gunmetal, metalic blue, or metalic gold)
Price is $80
Tanabe Swaybars Available
We now have Tanabe front swaybars available!
For most street, mountain driving, road racing and drifting, we suggest using a upgraded front swaybar, and the stock AE86 GTS rear swaybar. I prefer the the Tanabe or TRD swaybar in the front. It is "just" right. It reduces body roll in the front, without inducing understeer, and the stock GTS rear swaybar still allows you to induce some weight transfer in the rear.
Price on the Tanabe Front Swaybar for the AE86 is $180.
posted by Gabriel Tyler @ 2:10 PM
-
Koyo Radiators Available
 We now have Koyo Racing and Koyo OEM style radiators available.
Full polished Aluminum Koyo Racing Radiators are $360
OEM Style Koyo replacement Radiators are $200
|
